HICEM STANDARD AE GOLD (Anti-white stain)

HICEM STANDARD AE GOLD

Exceed Standard Quality – Class 1++

Tile Adhesive: For large-format tile, wall, exterior work and swimming pool

Protect sticky white-stain flows over decorative surfaces

Masonry work: sticky, fine and smooth texture Bonding performance > Class 1++ Plus Anti-Efflorescence (AE) performance

 

Product code : SG-01

Price : XXX (Contact distributors) baht/bag

Quantity : 20 kg/bag

Using quantity : 3-5 square meter/20 Kg (Bag)

Storage : 1 year after manufacturing date with unopened and keep in dry store with good ventilation.

  • For large-format tile, wall, exterior work and swimming pool
  • Protect sticky white-stain flows over decorative surfaces: granite, granito, marble, natural stone etc.
  • Masonry work: sticky, fine and smooth texture

Surface preparation

  • Substrate should be sound, clean and dry with normal absorption. Sprinkle may be needed to ensure the surface (outdoor) is not too dry.
  • Use a notched trowel to spread adhesive straight one direction
  • For maintenance or renew the substrate should be left to set at least 7 days before laying tiles.
  • Shading should be provided to protect against heat, sunlight and rain before setting the tiles

Mixing

Mix adhesive powder 20 kg. : clean water 4-5 litre (20-25% to adhesive)

Leave another 5 mins approximately for slaking period, after mix should be used within 2-4 hrs.

How to apply

  1. Use cement mixer at low speed until it homogenizes
  2. Spread adhesive straight one direction
  3. Back Buttering
  4. Shading to protect against heat & rainfall during tile installation

 

It is high recommended to back buttering on granito, porcelain & any low absorption tile. Use notched trowel with suitable depth of teeth to balance tile thickness. Spread adhesive straight one direction only. Suction cup should be used for placing large and heavy tiles.

 

Recheck that swimming pool is equipped with waterproofing system before tiling. Avoid installation during strong sunlight, and provide shading to protect against heat & rainfall during tile installation. Use comb trowel and butter back of tiles, press tightly. Leave 24 hrs. for setting and another 7 days before open the area.

Limitation

  1. Not recommended to set tile size over than 120x240 cm. (Use HICEM EXCEL AE GOLD)
  2. Not suitable for non-porosity or less than 0.20% absorption.
  3. Not recommended to set the tile higher than 5-6 m. It should be used together with hook.
  4. Not suitable for glossy or coated surface. Painted surfaces should be sanded off before tile settings.

Caution:

  1. Use rubber hand gloves, dust mask and safety goggles. In case of allergy seeks medical advice immediately.
  2. Keep out of reach of children.

1 year after manufacturing date with unopened and keep in dry store with good ventilation.

ISO 13007 part 2, EN 1348: International Standard

Slaking time 5 mins

Bucket life 3-4 hrs.

Open time 20-30 mins

Recommended thickness of adhesive 3-10 mm.

Back buttering is highly recommended for large-format and outdoor tile (tile size over 30x30 cm.)

Initial setting time 5 hrs. 48 mins

Final setting time 6 hrs. 15 mins