HICEM Sanded Microkiller Plus Silicone and Anti-Efflorescence (SMS+- AE)

HICEM Sanded Microkiller Plus Silicone and Anti-Efflorescence (SMS+- AE) Colored Grouts for Ceramic Tile: CGCT

For Outdoor-Swimming pool or any areas expose to wet-dry cycle during day/night time 

 

Product code : SMS+ - AE

Price : price depends on color

Quantity : 5 kg/gallon

Using quantity :

Storage : 12 months (from manufacturer date) and keep in unopened package & good ventilation

HICEM Sanded Microkiller Plus Silicone and Anti-Efflorescence (SMS+- AE) CGCT HICEM Colored Grout is the special grade with high performance especially to use for outdoor, immersion or any exposes wet-dry cycle area. Outstanding properties for this grout are as following:- 

  1. Anti-Efflorescence effect (Prohibit white sticky stain of Calcium Carbonate) 
  2. Good performance of Hydraulic pressure: 5 bars (50,596 kg/sq. meters) 
  3. High compressive strength: 33.32 Mpa 
  4. High water impermeability. 
  5. 2-layer water resistance (Surface and inner texture)  
  6. Inhibit growth of mold, fungi and algae. (Microbial protection/Microkiller)  
  7. Weak acid - base resistance. (pH for swimming pool recommendation is 7.2 -7.6 or 0.6-1.0 ppm of  Chlorine). 
  8. Suitable for joint 2-12 mm./ floor and wall. 
  9. Environmental friendliness.
  1. ensure good bonding & performance.       

     Do not let waterlogging, avoid application in high temperature or direct sunlight. Covering over the areas   

     to protect heat rising during work period or unexpected rain.

  1. Mixing Sanded Microkiller Plus Silicone and Anti-Efflorescence (SMS+- AE) HICEM Colored Grout with the ratio 100 parts per 35 parts of clean water by volume (or 1,000 gm of SMS+- AE with 350 gm of clean water)
      - pour 250 gm of clean water into the bucket.
      - smoothly pour 1,000 gm of SMS+- AE colored grout into water stir thoroughly, then add water 100 gm   

    left into the mix and stir until becomes homogeneous. leave about 3-4 mins.

  1. Use rubber trowel to fill up joints. Press back and forth continuously. Make sure that no air bubbles or   

    voids inside. Wipe the excess grout off with damp sponge (20 mins approximately) before grout setting.   

    Leave another 60 mins then clean tiles surface. (rough surface should be clean earlier)
d. Leave grout setting another 12 hrs. then sprinkle with water 2 - 3 days more for curing. Leave 3 days at  least before using area.

  • Mixed SMS+- AE colored grout should be used within 20-30 mins.
    Do not add water after it becomes dry. Discard and start mixing again.
  • For best Anti-Efflorescence performance, is should be used together with HICEM WATERPROOF Tile Adhesive 20 kg./bag
  • Grouting area should be sound and firm.
  • It is not suitable for metal, aluminium, wood or glass substrate.
  • Clean solution should not be strong acid.
  • Keep out of reach of children  
  • Use gloves, goggle during application. Seek medical service in case of skin allergy or feel uncomfortable.

One year starting from manufacturer date. Keep in unopened package & good ventilation.