HICEM Anti-Efflorescence and Microkiller Colored grouts (AE-M)

HICEM Anti-Efflorescence and Microkiller Colored grouts (AE-M)

Colored Grouts for Granite & Porcelain Tiles 

Anti-Efflorescence “Crystal Technology”

Microkiller / Microbial protection

Product code : AE-M

Price : price depends on color

Quantity : 1 kg./bag (24 bags/box)

Using quantity : 2.0-4.0 square meter/kg. (approximately)

Storage : 12 months (from manufacturer date) and keep in good ventilation

AE-M-Photoroom

“Crystallization Technology”

HICEM Anti-Efflorescence and Microkiller Colored grouts: is high efficiency to block-reaction causes Calcium Carbonate (CaCO3) deposit on top, and flow over tile. Plus excellence guarding performance against Microorganism (Microkiller)

HICEM AE-M is a leading generation of tile grouts that has distinctive features to suppress sticky-white stain deposit and flow over tiles. It is suitable for architectural applications such as decorations to enhance visual appearance. Especially outdoor tile works that normally expose to wet & dry cycle such as fountain, external wall, staircase hall, or any open designed spaces that is covered with marble/granite or exclusive grey to black porcelain tiles. HICEM AE-M also has excellence performance in term of mold and bacteria protection (Microkiller) even in stuffy area.

HICEM AE-M suitable for marble, granite, luxury porcelain, and import tiles that are displayed outdoor. Inhibit white slurry flow over tile with excellence protection against Microorganism (Microkiller). 

  • For all type of ceramic. 
  • Suitable for joint 1-7 mm. 
  1. Blocking sticky white-stain slurry, affecting from Efflorescence reaction (causes CaCo3), flows over tiles on top.
  2. High endurance against abrasion more than typical grouts.
  3. Stand against intrusion of harmful moisture according to impermeable crystal that are the key ingredient.
  4. Reduce shrinkage, cracking and higher compressive strength compare to common sealants.
  5. Cover all over basic requirements of Microguard, condensed and smooth texture with anti-stubborn stain.
  6. Homogenize creamy, easy to use.

Surface preparation & Application

1.Remove dust from grooves and recommended to grout at least 24 hrs. after fixing tiles.

2.Pour 1 kg of HICEM AE-M to 0.4 - 0.5 litre of water approximately.

   This ratio may vary according to working condition.

3.Mix thoroughly and leave it to slake 4-6 mins. then fill in gaps.

4.Apply grouts on tile with rubber comb in oblique direction.

5.After grouting 15-20 mins, clean the excess on tile surface with damp cloth.

6.Leave it sets at least another 48 hrs. before using the area. .

Any area in touch with high moisture or frequently exposed to water especially open spaces.

2-4 sq.m approximately.

Use rubber hand gloves, dust mask & safety goggles. In case of allergy seek medical advice immediately. Keep out of reach of children.