HICEM EXCEL-POWER

HICEM EXCEL-POWER

                                                     " Excellent quality "

Cement-based adhesive for supreme and heavy tile work. Especially tile over tile

Product code : S-02

Price : XXX (Contact distributors) baht / bag

Quantity : 20 kg./bag

Using quantity : 3-5 square meter/20 kg. (Bag)

Storage : 1 year (from manufacturer date) and keep in good ventilation

HICEM Excel-Power is an adhesive dry-mix mortar specifically modified for supreme and heavily tile work. It is deliberately added with special chemical agents from Germany, which maintain adhesion and cohesion over long period even under extreme and cyclical conditions such as continuous immersion of water or for outdoor use. Most research-intensive chemical agents are enable HICEM Excel-Power to prevent the tile from cracking or lifting as a result of stresses, and loads as well as high temperature or strong sunlight. HICEM Excel - Power is suitable for hard working surface such as swimming pool, warehouse, factory, public area, garage etc. HICEM Excel-Power also definitely works for retiling over previous tile floor or wall without removal requirement. (for best performance, should be used together with HICEM Flex: Latex Adhesive Emulsion) 

Supreme and heavily tile work.

  1. Working surface should be clean and free of contaminants.
  2. Mix HICEM Excel-Power into pure water with 3:1 portion (by volume) stirs briskly about 5 mins or until well blended. Let stand for 3-5 mins. Do not add more water. Mixture will be viable for approximately 40-50 mins.
  3. Apply HICEM Excel-Power mixture to the working surface in a smooth layer of 4-6 mm. thick, then comb the adhesive with a notched trowel for a ribbed effect. Apply the tile firmly with a slight twist to ensure proper adhesion.

-: Excessively warm or dry surfaces can be dampened slightly with water before adhesive application.

-: On uneven surfaces, HICEM Excel - Power may be applied in various thickness from 5-10 mm. to allow a smooth and level tile application. A thickness greater than 10 mm. is not recommended.

-: Avoid spreading excessive adhesive over a large surface which could dry before tile application.

Chlorine for swimming pool: 0.6-1.0 ppm, pH 7.2-7.6

ISO 13007-2005 

Tensile adhesion strength after 28 days                1.16 N/mm2 

Tensile adhesion strength after water immersion 1.46 N/mm2 

Tensile adhesion strength after heat aging            1.27 N/mm2 

Tensile adhesion strength after freeze-thaw cycle 1.14 N/mm2

Open time    30 mins 

Slip resistance    0.20 mm. 

Deformability    7.30 mm.