HICEM WATERPROOF

HICEM WATERPROOF

Crystalline waterproofing adhesive mortar: for any construction design.                           " 2 in 1 / Hybrid: Waterproof & Adhesive " (Excellent bonding + Water impermeability)

Product code : S-11

Price : XXXX (Contact distributors) baht / bag

Quantity : 20 kg./bag

Using quantity : 3-5 square meter/20 kg. (Bag)

Storage : 1 year (from manufacturer date) and keep in good ventilation

HICEM Waterproof is a new product of hybrid cement combining the value of true waterproofing with the strength of adhesive for tile installation or any construction project. A leading and respected laboratory developed and tested this innovative cement to permanently seal and bond tiles to prevent water damage. The new technology activates a crystal sealer whenever exposed to water and effectively blocks the naturally porous cement providing a new level of durability against the ravages or moisture, chemical agents and flooding. HICEM, a leading name in adhesive mortar production for many years, now leads the industry in this breakthrough method of combating the natural dangers of rain of flood water intrusion HICEM WATERPROOF. offer "water-proofing" for the first time as opposed to mere "water-resistance" of other products. 

Waterproofing for mortar and concrete works.

- Internal waterproofing by activating properties that become a part of the cement matrix and withstands high hydrostatic pressure.

- Maintain adhesion and cohesion over lengthy periods even under extreme and cyclical conditions.

- Suitable for tile installation, plastering, or any concrete construction on building areas exposed to water intrusion.

  1. The substrate should be flat, level, oil and dusty free.
  2. Mix HICEM WATERPROOF into clean water, water 20-30% of total weight or 4 - 6 kg. of water/20 kg of HICEM WATERPROOF (1 bag)
  3. Apply HICEM WATERPROOF by notched trowel 1 sq.m. each time with the average 0.5-1.0 cm. thickness. Then press the tile and adjust as required. (Adjustment time is about 15 mins) 

For waterproof mortar or other concrete works, HICEM WATERPROOF should apply continuously with the thickness not less than 0.5-1.0 cm.

Water Penetration Test        DIN 1048:Part 5-1991 10 mm. 

Compressive Strength         ASTM C109 633 Kgf/cm2 

Tensile Adhesion Strength ISO 13007 Part2/ EN 1348 1.84 N/mm2 

Tensile Adhesion Strength ISO 13007 Part2/ EN 1348 

Open time 30 mins 

Setting time ASTM C191 6 hrs. 50 mins