" Standard quality "
Cement-based adhesive for tile installation: interior & exterior, porcelain & granitto tiles
Product code : S-01
Price : XXX (Contact distributors) baht / bag
Quantity : 20 kg./bag
Using quantity : 3-5 square meter/20 kg. (Bag)
Storage : 1 year (from manufacturer date) and keep in good ventilation
HICEM Standard is an adhesive dry-mix mortar for typical tile setting or repairs. The bonding agents and other additives of HICEM Standard meet all the requirements for a strong, permanent, moisture resistant bond as well as high technical standard. It is provide unbeatable advantage of economical price, fast and reliable on site with functionality and durability. HICEM Standard is highly recommended for a wide variety of interior and exterior designs, all wall and floor tile installation in homes or commercial businesses.
typical tile work.
1.Working surface should be clean and free from contaminants.
2.Mix HICEM Standard into pure water with 3:1 portion (by volume), stirs briskly about 5 mins or until well blended. Let stand for 3-5 mins. Do not add water. Mixture will be viable for approximately mins.
3. Apply HICEM Standard mixture to the working surface in a smooth layer of 4-6 mm. thickness, then comb the adhesive with a notched trowel for a ribbed effect. Apply the tile firmly with a slight twist to ensure proper adhesion.
-: Excessively warm or dry surfaces should be dampened slightly with water before adhesive application.
-: Avoid spreading excessive adhesive over a large surface which could dry before tile application.
-: On uneven surfaces, HICEM Standard may be applied in various thickness from 5-10 mm. to allow a smooth and level tile application. A thickness greater than 10 mm. is not recommended.
ISO 13007-2005
Tensile adhesion strength after 28 days 1.18 N/mm2
Tensile adhesion strength after water immersion 0.88 N/mm2
Tensile adhesion strength after heat aging 0.87 N/mm2
Tensile adhesion strength after freeze-thaw cycle 0.75 N/mm2
Open time 30 mins
Slip resistance 0.20 mm.
